Please read the main instructions before commencing,
then follow steps shown in the diagram below.

1. Position the front mounting at the base of the clyinder adjacent to the crankcase.
   
   
2. Adjust the height to suit your requirements then lock the two M8 bolts as shown
   
   
3. Both the front and rear lower adjusters need to be at the lowest settings
   
   
4. Locate the rear mounting as shown and secure in place at the left hand threaded
   bolt hole in the crankcase using the M10 bolt provided.
   
   
5. Mount the side stand as in main instructions, note the 'C' clamp for the ducati has
   two figure of '8' holes allowing extra inward travel to cover the stand foot.
   
   
6. Reference to main lifting arm.